Mechanics
Q Find the value of T1 and T2 respectively if the value of F is 10N
Q Find the value of T1 and T2 respectively if the value of F is 10N
1 Answer
Tarun Velicheti
Hello Friend, I will show a very simple method to do this problem ..but for that you should draw the Free Body Diagrams of each block and mark the forces acting on it , let T1 be the tensio of string among block 2-3 kg and T2 be the tension of stringbetween 3-5 kg blocks
On block 1 with mass 2 kg
F-T1=2xa=2 N
T1=8N ..here i subtracted the F and T1 because they are opposite to each other and keep in mind that they are moving to the right with 1m/s2 acceleration
on block with 3 kg
T1-T2=3xa=3N
which implies that T2 is 5N as T1 was 8N
There fore you have the answer ..for all this kind .. draw Free Body Diagrams and mark all forces acting on it and equate ..
Hope this helps
Other Related Questions on mechanics
Three identical balls are placed on a frictionless
horizontal surface touching each other. They stick to
each other because of adhesive. Another ball of same
radius and mass m is placed over the void created by
the three balls. Find the forces applied by the balls
kept on the floor to each other if the system remains
in equilibrium.
Three identical balls are placed on a frictionless
horizontal surface touching each other. They stick to
each other because of adhesive. Another ball of same
radius and mass m is placed over the void created by
the three balls. Find the forces applied by the balls
kept on the floor to each other if the system remains
in equilibrium.
mechanics
Last Activity: 10 Months ago
A car loaded with water having total mass 1000 kg moves on a straight horizontal Road starting from rest under the action of a force of 100 Newton. The water spills throw a small hole in the bottom at a rate of 0.1 KG per second the velocity of cart after 300 seconds is nearly.
11
21
31
41
A car loaded with water having total mass 1000 kg moves on a straight horizontal Road starting from rest under the action of a force of 100 Newton. The water spills throw a small hole in the bottom at a rate of 0.1 KG per second the velocity of cart after 300 seconds is nearly.
11
21
31
41
mechanics
Last Activity: 10 Months ago
A metal strip clamped at one end vibrates with a frequency of 20 Hz and amplitude of 5 mmat the free end, where a small mass of 2 g is positioned. determine(i) The velocity of the end when passing through the zero position(ii) The acceleration at maximum displacement(iii) The maximum kinetic energy of the mass
A metal strip clamped at one end vibrates with a frequency of 20 Hz and amplitude of 5 mm
at the free end, where a small mass of 2 g is positioned. determine
(i) The velocity of the end when passing through the zero position
(ii) The acceleration at maximum displacement
(iii) The maximum kinetic energy of the mass
mechanics
Last Activity: 3 Years ago
If a=x² find the displacement at t =3sec if body velocity at t= 0 sec is 0
If a=x² find the displacement at t =3sec if body velocity at t= 0 sec is 0
mechanics
Last Activity: 3 Years ago