Grade 11Mechanics
how to easily sove prblems of mechanics and then practice for nsep
how to easily sove prblems of mechanics and then practice for nsep
1 Answer
Umakant biswal
Approved Tutor Answer9 Years ago@ hemanshu
mechanics problems are not difficult if u will understand the formula with clear concept .
and while starting , make sure you are in right direction ,
follow the following method while solving the problem .
1- read the problem twice .
2- then make the free body diagram if required , else just make a simple arrengement , but diagram is req .
3- recall all the formula that u studied in that chap which can be applicable to that concept
4- then check what the question is asking ,
5- then apply the formula and make sure u make proper conversion of units
6- then apply formula and get answer .
LET ME KNOW IN WHICH TOPIC OF MECH U ARE HAVING PROB .
SO, THAT I CAN GIVE SOME TRICKS OF THAT TOPICS
all the best
mechanics problems are not difficult if u will understand the formula with clear concept .
and while starting , make sure you are in right direction ,
follow the following method while solving the problem .
1- read the problem twice .
2- then make the free body diagram if required , else just make a simple arrengement , but diagram is req .
3- recall all the formula that u studied in that chap which can be applicable to that concept
4- then check what the question is asking ,
5- then apply the formula and make sure u make proper conversion of units
6- then apply formula and get answer .
LET ME KNOW IN WHICH TOPIC OF MECH U ARE HAVING PROB .
SO, THAT I CAN GIVE SOME TRICKS OF THAT TOPICS
all the best
Other Related Questions on mechanics
Three identical balls are placed on a frictionless
horizontal surface touching each other. They stick to
each other because of adhesive. Another ball of same
radius and mass m is placed over the void created by
the three balls. Find the forces applied by the balls
kept on the floor to each other if the system remains
in equilibrium.
Three identical balls are placed on a frictionless
horizontal surface touching each other. They stick to
each other because of adhesive. Another ball of same
radius and mass m is placed over the void created by
the three balls. Find the forces applied by the balls
kept on the floor to each other if the system remains
in equilibrium.
mechanics
Last Activity: 10 Months ago
A car loaded with water having total mass 1000 kg moves on a straight horizontal Road starting from rest under the action of a force of 100 Newton. The water spills throw a small hole in the bottom at a rate of 0.1 KG per second the velocity of cart after 300 seconds is nearly.
11
21
31
41
A car loaded with water having total mass 1000 kg moves on a straight horizontal Road starting from rest under the action of a force of 100 Newton. The water spills throw a small hole in the bottom at a rate of 0.1 KG per second the velocity of cart after 300 seconds is nearly.
11
21
31
41
mechanics
Last Activity: 10 Months ago
A metal strip clamped at one end vibrates with a frequency of 20 Hz and amplitude of 5 mmat the free end, where a small mass of 2 g is positioned. determine(i) The velocity of the end when passing through the zero position(ii) The acceleration at maximum displacement(iii) The maximum kinetic energy of the mass
A metal strip clamped at one end vibrates with a frequency of 20 Hz and amplitude of 5 mm
at the free end, where a small mass of 2 g is positioned. determine
(i) The velocity of the end when passing through the zero position
(ii) The acceleration at maximum displacement
(iii) The maximum kinetic energy of the mass
mechanics
Last Activity: 3 Years ago
If a=x² find the displacement at t =3sec if body velocity at t= 0 sec is 0
If a=x² find the displacement at t =3sec if body velocity at t= 0 sec is 0
mechanics
Last Activity: 3 Years ago