cyclotrone
devidutta kanar , 13 Years ago
Grade 12th Pass
Mechanics> cyclotrone...
4 AnswersAbhinav Bahiya
refer your ncert book it has a good data about it........
Dastagir Hassain
CYCLOTRON IS ADEVICE FOR THE ACCELERATION OF PROTONS OR OTHER IONS.
IT COSISTS OF AN EVACUATED CONTAINER PLACED BETWEEN THE POLES OF A LARGE ELECTROMAGNETIC,
WITHIN THE CONTAINER THERE IS AFLAT METALLIC CAN CUT INTO TWO D-SHAPED PIECES ,OR DEES.
AN OSCILLATING HIGH-VOLTAGE GENERATOR IS CONNECTED TO THE DEES ,THIS CREATES AN OSCILLATING ELECTRIC FIELD IN THE GAP BETWEEN THE DEES. THE FREQUENCY OF THE VOLTAGE GENERATOR IS ADJUSTED SO THAT IT COINCIDES FREQUENCY
f=qb/(2 pi m).THIS IS CALLED AS CYCLOTRON FREQUENCY.
AN ION SOURCE AT THE CENTER OT THE CYCLOTRON RELEASES PROTON OR OTHER IONS.
SRIKANTH A
CYCLOTRON IS ADEVICE FOR THE ACCELERATION OF PROTONS OR OTHER IONS.
IT COSISTS OF AN EVACUATED CONTAINER PLACED BETWEEN THE POLES OF A LARGE ELECTROMAGNETIC,
WITHIN THE CONTAINER THERE IS AFLAT METALLIC CAN CUT INTO TWO D-SHAPED PIECES ,OR DEES.
G Ashwin -
It is basically a device used to measure acceleration of ions. For other details use NCERT or other refreshers
LIVE ONLINE CLASSES
Prepraring for the competition made easy just by live online class.
Full Live Access
Study Material
Live Doubts Solving
Daily Class Assignments
Other Related Questions on mechanics
Three identical balls are placed on a frictionless
horizontal surface touching each other. They stick to
each other because of adhesive. Another ball of same
radius and mass m is placed over the void created by
the three balls. Find the forces applied by the balls
kept on the floor to each other if the system remains
in equilibrium.
Three identical balls are placed on a frictionless
horizontal surface touching each other. They stick to
each other because of adhesive. Another ball of same
radius and mass m is placed over the void created by
the three balls. Find the forces applied by the balls
kept on the floor to each other if the system remains
in equilibrium.
mechanics
1 Answer Available
Last Activity: 8 Months ago
A car loaded with water having total mass 1000 kg moves on a straight horizontal Road starting from rest under the action of a force of 100 Newton. The water spills throw a small hole in the bottom at a rate of 0.1 KG per second the velocity of cart after 300 seconds is nearly.
11
21
31
41
A car loaded with water having total mass 1000 kg moves on a straight horizontal Road starting from rest under the action of a force of 100 Newton. The water spills throw a small hole in the bottom at a rate of 0.1 KG per second the velocity of cart after 300 seconds is nearly.
11
21
31
41
mechanics
1 Answer Available
Last Activity: 8 Months ago
A metal strip clamped at one end vibrates with a frequency of 20 Hz and amplitude of 5 mmat the free end, where a small mass of 2 g is positioned. determine(i) The velocity of the end when passing through the zero position(ii) The acceleration at maximum displacement(iii) The maximum kinetic energy of the mass
A metal strip clamped at one end vibrates with a frequency of 20 Hz and amplitude of 5 mm
at the free end, where a small mass of 2 g is positioned. determine
(i) The velocity of the end when passing through the zero position
(ii) The acceleration at maximum displacement
(iii) The maximum kinetic energy of the mass
mechanics
2 Answers Available
Last Activity: 3 Years ago
An object of mass m = 0.25 kg oscillates in a fluid at the end of a vertical spring of springconstant kH = 85 N/m, see Fig.1. The effect of the fluid resistance is governed by thedamping constant b = 0.07kg/s.(i) Find the period of the damped oscillation.(ii) By what percentage does the amplitude of the oscillation decrease in each cycle?
An object of mass m = 0.25 kg oscillates in a fluid at the end of a vertical spring of spring
constant kH = 85 N/m, see Fig.1. The effect of the fluid resistance is governed by the
damping constant b = 0.07kg/s.
(i) Find the period of the damped oscillation.
(ii) By what percentage does the amplitude of the oscillation decrease in each cycle?
mechanics
1 Answer Available
Last Activity: 3 Years ago
If a=x² find the displacement at t =3sec if body velocity at t= 0 sec is 0
If a=x² find the displacement at t =3sec if body velocity at t= 0 sec is 0
mechanics
1 Answer Available
Last Activity: 3 Years ago