Guest

a circuit has 10 mh ,100 ohms , 1 uf , and v=10sinwt (volt) match the following a.w=8000 rad/s p. peak current in the circuit is less than 0.1 a. b. w=10000 q. voltage across combination n current is in same phase c.w=10500 rad/s r. voltage across combination leads the current d. w=1000 rad/s if R=50 OHMS instead of 100 ohms s. current thru circuit leads voltage across it.


a circuit has 10 mh ,100 ohms , 1 uf , and v=10sinwt (volt)
match the following
a.w=8000 rad/s                     p. peak current in the circuit is less than 0.1 a.
b. w=10000                           q. voltage across combination n current is in
                                               same phase
c.w=10500 rad/s                      r. voltage across combination leads the                                               current
d. w=1000 rad/s if R=50 OHMS
instead of 100 ohms                      s. current thru circuit leads voltage across
                                                     it.


Grade:upto college level

1 Answers

ROSHAN MUJEEB
askIITians Faculty 829 Points
2 years ago
The ac source’s effective (or rms) value should also be 9 V. This measn the peak value should be 9√2 V, so the peak-to-peak value should be 18√2 = 25.5 V.

Think You Can Provide A Better Answer ?

Provide a better Answer & Earn Cool Goodies See our forum point policy

ASK QUESTION

Get your questions answered by the expert for free