Grade 12General Physics
what is banking of roads and why banking of roads is done?
what is banking of roads and why banking of roads is done?
3 Answers
Riddhish Bhalodia
Askiitians have a good material on the banking of roads
have a read and if you have any specific doubt regarding the same do ask
http://www.askiitians.com/iit-jee-physics/mechanics/banking-of-roads.aspx
have a read and if you have any specific doubt regarding the same do ask
http://www.askiitians.com/iit-jee-physics/mechanics/banking-of-roads.aspx
Prabhakar ch
Banking of a Road Surface. The normal reaction, R, has no component acting towards the centre of the circular path. Therefore the required centripetal acceleration is provided by the force of friction, Ff, between the wheel and the road. Banking of roads is done because when a curve road is came if we have going in speed we will meat an accident
N JYOTHEESWAR
The phenomenon of raising outer edge of the curved road above the inner edge is to provide necessary centripetal force to the vehicles to take a safe ride.it is used to prevent skidding of vehicles.
Other Related Questions on general physics
In viewing through a magnifying glass, one usually positions one's eyes very close to the lens. Does angular magnification change if the eye is moved back?
In viewing through a magnifying glass, one usually positions one's eyes very close to the lens. Does angular magnification change if the eye is moved back?
general physics
Last Activity: 9 Months ago
moment of inertia of a equilateral triangle about an axis passing through centre and perppendicular to the plane
moment of inertia of a equilateral triangle about an axis passing through centre and perppendicular to the plane
general physics
Last Activity: 3 Years ago
. Because of the rotation of the earth, a plumb bob may not hang exactly along the direction of
the earth’s gravitational pull (its weight) but deviates slightly from this direction. Calculate the
deviation (a) at 40 latitude, (b) at the poles, and (c) at the equator
. Because of the rotation of the earth, a plumb bob may not hang exactly along the direction of
the earth’s gravitational pull (its weight) but deviates slightly from this direction. Calculate the
deviation (a) at 40 latitude, (b) at the poles, and (c) at the equator
the earth’s gravitational pull (its weight) but deviates slightly from this direction. Calculate the
deviation (a) at 40 latitude, (b) at the poles, and (c) at the equator
general physics
Last Activity: 3 Years ago
The length of a massless rod is measured using vernier callipers having 10 vernier scale divisions and least count of 0.1 mm. Two masses 1.00 ± 0.01 kg and 4.00 ± 0.02 kg are attached to its ends. If reading of vernier scale is 5 divisions coinciding with 1.3 cm, what is the % error in locating centre of mass from lighter mass
The length of a massless rod is measured using vernier callipers having 10 vernier scale divisions and least count of 0.1 mm. Two masses 1.00 ± 0.01 kg and 4.00 ± 0.02 kg are attached to its ends. If reading of vernier scale is 5 divisions coinciding with 1.3 cm, what is the % error in locating centre of mass from lighter mass
general physics
Last Activity: 3 Years ago
A block is kept on x-y plane at a point (2m,3m). It is pushed with a force of magnitude 10 Ntowards point (5m,7m). The force can be represented as?
A block is kept on x-y plane at a point (2m,3m). It is pushed with a force of magnitude 10 Ntowards point (5m,7m). The force can be represented as?
general physics
Last Activity: 3 Years ago